Itel A12 Hang on Logo Afterflashing Fixed 100% working free
If you flash your itel A12 and hang on Itel Logo on this page you are going to find a working firmware for your device.Here are the links Above.
Using this iTel A12 flash file, you can format, flash and *upgrade your iTel A12.
REQUIREMENTS;
DOWNLOAD THE SPECIAL TOOL HERE
iTel A12 Stock ROM Hang Logo Fixed Firmware Links
NOTE:
- The firmware shared on this page is officially released by the company and helps you to recover your device if you ever got bootloop, software error, update error, hanging and dead issue, If you are going to flash the above Firmware on your iTel A12, then take a backup of everything as because your personal data will be deleted after flashing the stock firmware.
IT FAILED ON NV-W OR REPARTATION PLEASE HELP ON FLASH TOOL VERSION THAT WILL FLASH SUCCESS'
ReplyDeleteuse cm2
DeletePlease bro can this version also work on 2017825 A12 version
DeleteSame problème. I need solution
ReplyDeletenot working
ReplyDeletewhat flashtool u used bro. help please
ReplyDeleteThanks working fine 10000%
ReplyDeleteHello how did you do it.....
DeleteHello
DeleteHi, what flash tool did you use?
DeleteHow to download from that link above... I cant download.. the link never direct me to download it keep direct me to other browser and not downloading
ReplyDelete
ReplyDeleteInfinity SC Firmware Detected
FW Size : 2279 MiB
Load Ok!
File Info
Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand : Itel
Device Model : itel_A12
Device CPU : sp7731ceb_A12
Device IntName : itel_A12
Device Version : 6.0
Device Compile : 13/09/2017 07:38:04 Õ
Device Project : A12-W507A-6.0-OP-EG-V037-20170913
Device ExtInfo : itel A12
Operation : Flash [ v1.27 ]
======= Flash
Files set for flashing :
[ MCU ] : SC77xx Infinity Package
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 27 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
PMTManager : Load 0x19 records
PMTManager : PMT Update Ok!
Flashing now
Update BootCode : u-boot-spl-16k.bin
Write Data ...
Write Data Ok!
Update BootCode : u-boot.bin
Erase block ...
Block erase Ok!
Write Data ...
Write Data Ok!
Write FSImage : prodnv.img
Write Data ...
Write Data Ok!
Write CodeData : sc7731C_CP0_modem.bin
Write Data ...
Write Data Ok!
Write CodeData : DSP_DM_Gx.bin
Write Data ...
Write Data Ok!
Erase Block : RuntimeData
Erase block ...
Block erase Ok!
Write CodeData : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
Write Data ...
Write Data Ok!
Write CodeData : logo_480x854.bin
Write Data ...
Write Data Ok!
Write CodeData : fblogo_480x854.bin
Write Data ...
Write Data Ok!
Write CodeData : boot.img
Write Data ...
Write Data Ok!
Write FSImage : system.img
Write Data ...
Write Data Ok!
Erase Block : PERSIST
Erase block ...
Block erase Ok!
Write FSImage : cache.img
Write Data ...
Write Data Ok!
Write CodeData : recovery.img
Write Data ...
Write Data Ok!
Erase Block : MISC
Erase block ...
Block erase Ok!
Write CodeData : sysinfo.img
Write Data ...
Write Data Ok!
Write FSImage : userdata.img
Write Data ...
Write Data Ok!
Elapsed: 00:04:03
Reconnect Power/Cable!
iused cm2 to flash
ReplyDeleteI av tried to use cm2 bt no luck at all aft d pmt load i will get these error msg of HW s not d same or empty batry pls how do i overcome these thank u
DeletePlease what's the solution for Qualcomm phones, not showing icons after flashing?
ReplyDelete